NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
RN316
2 Topics
RN316 Initial setup | X-RAID2 | SSD + HDDs any advantages / disadvantages?
G'day, I've looked around but either my searching is poor or there's nothing that I can find that looks specifically at this. Please feel free to point me at threads that I may have missed if this has already been addressed! I intend to use X-RAID2 as the mixing and matching of HDD sizes is one of the main reasons I went with the RN316 - to use a baseline of HDDs that I already have (empty) and expand as HDDs become cheaper or I need the capacity. I'm just getting around to setting up my ReadyNAS 316 (OS6) for the first time, and have available the following for use in the NAS. I don't need to use all of them, but would like advice on the best mix / order / etc if possible. I have: 1x 256Gb SSD 3x 1TB HDD 2x 2TB HDD 3x 3TB HDD Numerous other smaller HDDs I've read the software and hardware manuals, and again, I may have missed this there, but: 1. Is it worth using an SSD as the first drive, so that the files used by the OS / cache etc live there? 2. Is there an advantage to using a single SSD in the ReadyNASes? 3. Is there a problem with using an SSD (smaller) mixed with HDDs (larger)? 4. Is there a recommended order to adding drives (start with smaller drives and add larger? Start with large and add smaller?) I really think I've missed an obvious post here in the forums, so please point me there if appropriate! Thanks.
Ready NAS not shutting down or rebooting - RN316
Hello folks in the community, I cannot shut down my ReadyNAS gracefully. Over the GUI it hangs on shutdown - the display is showing " Powering Off - Goodbye" I also tried the hardware button method on the front of the RN - but again the display shows "Powering Off- Goodbye" But the system doesn't shut down any further - it is stuck in that status. What else can be done?? Running on OS 6.5.0 - but also had this issue under previous OS once or twice. Update doesn't work over the GUI. Is there another solution than pulling the AC Power Plug?? Starting the webinterface - I can still browse the shares but trying to reboot over the software I/O switch or the hardware button on the frontpanel won't work. Any ideas ? Help greatly appreciated.