NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
SNMP
3 TopicsSNMP polling issue FVS336GV2
Hi all, Working on setting up snmp polling from a server on the LAN polling the LAN address assigned to the firewall with no luck. Few things I've noticed, I did a packet capture from the snmp management server and the firewall (capturing on the LAN interface), the packet capture from the snmp management server shows the getrequest sent out, and the capture from the firewall does not show it was received on the LAN interface, however here is the odd the part, I then enabled system logs to log all unicast traffic and seeing the snmp traffic from the management server to the firewall LAN address, but do not see a getresponse from the firewall in either case. Hitting my head against the wall with this one, should be a 10 minute setup, any input is apprecaited!Solved4.5KViews0likes10Commentsreally slow internet speed over FVS318G
hi I have 100Mbps over internet cable connection. FVS318G SNMP is connected to the cablecom modem, but the download speed is just 15Mbps. If I try to connect my PC or my notebook to the cable modem directly, then I get 100Mbps. How is the max download speed over FVS318G router with firewall enabled? BTW what happens if I try to change from NAT to Classical Routing between WAN & LAN interfaces, it will disable firewall?11KViews0likes4Commentssnmp with FVS336G
Hiya I have configured a Zabbix server and am trying to connect my FVS335G to it. I have configured the FVS336G with the following SNMP entry: IP Address Subnet Mask Port Community x.x.x.x 255.255.255.255 162 public telnet to port 162 from that host yields this: #telnet 172.16.2.254 162 Trying 172.16.2.254... telnet: Unable to connect to remote host: Connection timed out what do i need to do to make jmy FVS336G respond? Firmware is 3.0.7-24 Thanks8.2KViews0likes3Comments