NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Tips from other users
21 TopicsReadynas ultra 6 dead motherboard
My Ultra 6 is not booting any more, After turning on the power the blue light goes on, disks start spinning, and i get readynas on the display. But it does not boor or the network lights on the back turn on. Reset does not work .... i have tried all the possible ways to reset the device, do a usb boot or tech support. No disks, new disk, replace memory Nothing works. Warranty is over and gone So i assume the mother doard is dead, So I would like to replace it but do not get this information where can i find a new board8.4KViews1like18CommentsDifferent size HDDs in RN204
Hi, I have recently bought an RN204 NAS with 2x 3TB HDDs and wanted to expand this (2 bays are empty). Currently it is set up in RAID format (although I'm not sure what setting - X-RAID/RAID5 etc) But I wanted to know if I go and buy 2x 6TB HDDs for example, would that give me a total of 9TB space and would I have to do any tinkering? Thanks in advance!Solved2.9KViews0likes2CommentsJoomla on readynas
Hi, First of all sorry for my bad english I'm using my nas RN104 only for storage and backup for my business and do not have any knowledge about programming etc. My problem is that i want to create a new joomla website and hosting it in my nas. I have done everything i could: Install php Install phpmyAdmin Install Mysqlserver and finally Install Joomla Also i followed the instructions about enabling http and redirecting default web access to a folder i created with the name "mywebsite". Everything seems to be ok but i missing something very important. The joomla files are not in the shared "mywebsite" folder and i don't know what to do Do i have to install joomla in the specific folder and how? Do i need to give web access to the folder where joomla files are located and how? Also i do not have access to the folder where joomla files are, because i'm a newbie. Thank you in advance2.2KViews0likes0CommentsRN4220 and SNMP connected UPS
I have a readynas 4220 running firmware 6.4.0. It is connected to a network enabled UPS. ( APC Symmetra LX 8000 RM ) I am polling the UPS with SNMP v1. I am getting " System: Error communicating with UPS 'Symetra' () " then 10 sec later " System: Communication with UPS 'Symetra' () is OK. " This runs in spurts. Quiet for a few hours, then 16 in about 2 hours of time. The UPS is not logging any alerts or error activity. Is this a proven connection method with a UPS? Or a feature that is not used much or is troublesome? I have 3 network connections running to the switch. 1g and 10g copper. Should not be a bandwidth issue. Garet4.6KViews0likes4CommentsReadyNas NV+ V1 Unable to communicate via Raidar/Frontview
Several weeks ago my NV+ V1 began to drop off my network, finally disapearing completely. When I reboot the unit all four drive lights are lit green, the power button stays lit, the eithernet port lights properly, and the lcd shows a valid IP address. If I initiate Raidar to go to Frontview I get nothing. I would love to get some help on how to get my NAS back up and runningSolved4.6KViews0likes16CommentsImpending doom, how do i upgrade disk
I have a ultra 2 raidiator 4.2.26 with 2 x 2tb flex raid, two volumes ,Disk one is showing errors. Both drives are backed up to external usb drives so data is OK for now. I am going to replace the suspect drive with a new 3tb drive How do I go about doing this ? Is the OS on the drive or unit ? I have a number of installed addons e.g python, SAB,sickbeard etc will they all have to be reinstalled and reconfigured ? Thanks people.3.5KViews0likes7CommentsReadynas 314 will not appear under Network in Windows 7 explorer only appears under Storage
Readynas 314 will not appear under Network in Windows 7 explorer only appears under Storage. I have tried the \\nasname\sharename approach (not sure if caps make any difference) and I get asked to login but giving the correct details results in a fail to connect. My PC is connected to my Apple Airport Extreme network via an extended Airport express (newest kind as of 2015) via ethernet. I suspect router settings but I have no idea how. I have not set a LUN yet (im not sure what that is really) but I have made an account with admin access privileges but logging in with this in windows exsplorer is a no go. Please can you help. Thanks, SFSolved7.2KViews0likes12Comments