NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
FVS338 Wan state:Down
Problem - Cannot connect to internal CCTV and it cannot use SMTP to get out. Background - We have FTTC connected to BTOpenreach switch, from here we connect to Plusnet and then onto the FVS338. Within the office we are OK to use VOIP phones, RDP out as needed and of course browse the internet. The Prosafe also cannot send emails to our external mailserver. If this were a Cisco asa5505 it would be far simpler perhaps. Here are the results of Netstat Interface List 14...f6 b7 e2 03 86 b2 ......Broadcom Virtual Wireless Adapter 11...20 89 84 5d 51 fc ......Broadcom NetLink (TM) Gigabit Ethernet 1...........................Software Loopback Interface 1 19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 20...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 15...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.74 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.74 276 192.168.1.74 255.255.255.255 On-link 192.168.1.74 276 192.168.1.255 255.255.255.255 On-link 192.168.1.74 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.74 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.74 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.1.254 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 276 fe80::/64 On-link 11 276 fe80::3c5c:7651:c26e:5128/128 On-link 1 306 ff00::/8 On-link 11 276 ff00::/8 On-link =========================================================================== Persistent Routes: None It appears the device itself cannot communicate out to the WAN and after trying to resolve this with Netgear online support since the 6th I thought I would try here. Any help is appreciated thanks Paul
UPnP Not activated On a FVS338
Hello awery one! need help! My problem is this. The UPnP-adjustment is inactivated on the router or it doesen't support the UPnP standard that it demands to automaticly konfigurate the portforwading to your FVS338. And i cant find where to opening that UPnP adjustment in NETGEAR Configuration Manager for FVS338 And i wont to have access to my VHS 2011 from the internet. So i hope som one here can help me. thx and love Tokboy
FVS338 end of life? Alternative router with multi-NAT?
I've standardised on the FVS338 for multi-NAT firewall routing from our corporate LAN to various industrial machines. I'm having trouble purchasing these in Europe and one supplier has informed me that the product is discontinued. 1. Has it been discontinued? 2. What would be a similar product? I need multi-NAT firewall. I don't need (or want) wireless. 8 LAN ports. Thank you.
FVS338 VPN problem
Hi I've had my FVS338 3.0.7-24 with a single remote access VPN working for a long time to an iPhone. Today I wanted to configure a site-to-site IPSec VPN tunnel between the FVS338 and another site running Vyatta. I don't know why but the remote access VPN doesn't work anymore and I can't get the site-to-site working at all. I've tried rebooting the FVS338 but it hasn't helped. Is the FVS338 not capable of having both remote access and site-to-site working at the same time? Thanks
FVX538 - Problems
Hello all: I am back, I have two FVX538 V2 units I have the following problems one of which has been ongoing for over a year. -======================= First Problem: I cannot get either of the units to take the firmware upgrade. I get an error that says: Upgrade Failed: Invalid Firmware File Length........ I have downloaded the firmware from the Netgear site at work and at home, file size is 7.55 MB from both locations, neither file seems to want to work. The firmware currently installed is 3.0.6-29 -======================= Second Problem: Every time I initiate an FTP update on my server the FVX538 craps out. The unit loses its internet connection and does not reset itself for up to 15 minutes or until I reboot the Netgear unit. I have taken this problem to Netgear support but there is no resolution to date and my last support request was 3/1/2011 I have the EXACT same problem as this post: http://forum1.netgear.com/showthread.php?t=63213&highlight=fvx538 It is most frustrating to have to take the FVX538 off-line, put on-line a FVS338 perform FTP upgrades only to then remove the FVS338 and reinstall the FVX538. It makes NO sense that when we perform an upgrade on the server which uses FTP to upgrade the server that the FVX538 unit loses its connection to the internet and locks up. What I have done is HARD RESET the routert, reset to factory defaults three times then after the third reset, reinstalled the settings by hand NOT using the backup restore and this does not appear to help at all. I have done this at least four times, twice per unit and it still does NOT work. It also makes NO sense that I have two of these FVX538 units and they BOTH act the same way. -====================== My setup is : WAN to FVX538, FVX538 to Netgear switch, switch to server, switch to workstations. Monitoring with the FVX538 is NOT an option as the unit locks up and I cannot stop the monitoring and download the file. All monitoring with the FVX538 is lost when it resets or I have to reboot the unit. I have Wireshark loaded on a laptop and a small Netgear 4 port hub – I can try to monitor on the LAN side or move hub in front of the FVX538 between router and WAN and I guess I could monitor the WAN. -===================== Up until now this has only been a nuisance but this is getting old. I REALLY NEED HELP WITH THIS. I would appreciate ANY help that anyone can provide. Thank you Kobie
