UPnP Not activated On a FVS338

some don't have upnp in the setting for few models and this is one of it.

you need to use inbound rules instead

Ok.
Thanks for the fast reply.

i will try this later.

Hallo again!
No have not get it to workt :(

This is what i have don so far.
1. Security-Costum services table
#60 - Name: RDP - Type: TCP - Port: 4125 - To: 4125 - Priority: Normal-Service

2. Security-Firewall Rules
Outbound Services
Service Name Filter LAN Users WAN Users Priority Bandwidth Profile Log Action
HTTP Allow Always ANY 192.168.1.6 Normal-Service NONE Never
HTTPS Allow Always ANY 192.168.1.6 Normal-Service NONE Never
RDP Allow Always ANY 192.168.1.6 Normal-Service NONE Never
FTP Allow Always ANY 192.168.1.6 Normal-Service NONE Never

Inbound Services help
Service Name Filter LAN Server IP Address LAN Users WAN Users Destination Bandwidth Profile Log Action
HTTP Allow Always 192.168.1.6 ANY WAN1 NONE Never
HTTPS Allow Always 192.168.1.6 ANY WAN1 NONE Never
RDP Allow Always 192.168.1.6 ANY WAN1 NONE Never
FTP Allow Always 192.168.1.6 ANY WAN1 NONE Never

And it still wont lett me surf on the mome page on the server.
My ip is 46.59.24.137
:(

Is there anything i have misst?

:p

Working.......
Dont ask me howe!

But thanks for the help.
Love Tokboy

Ha ha!

Sorry have a bitt of a rush.

Still dont working is
The Home page on the server.
But thinking thats not the Routers handling.
The Remote Web Access working from the outside.
So it most be somthing on the server.

So Thanks for the help so far.
And have a question to "jmizoguchi" if you some time have time to answer
i will be happy.

Question:
How is it best way to use a
"NETGEAR ProSafe VPN Firewall FVS338" on :confused:
This is what I have:
100/100 broadband.
1st WGR614v7 For Wireless for som lapptopps.
1st Server, Windows Home Server 2011
1st Networksprinter.
2st Desktop computers.
1st Satellite TV receivers
And several pieces of other media machines like
Popcour A210 and A110, BlueRay and TV.

This is how i use it now:
From broadband outlet to the FVS338
From the FVS338 to WGR614 so i can have the Wirreless contacts.
The FVS338 is config like a DHCP Server
I have enable Source MAC Address Filtering so only listed MAC Addresses have internet access. I also Hav configed IP/MAC Binding for all my divices
Is this the best way to use a FVS338 or is it on a ather way.
Perhaps like a VPN thing. (Do not really know what it is)

Why I chose a FVS338 is that I needed 8 ports for all my media stuff.
And this was the best I found.

Hope you will take the time
to give me a recommendations how best to use my FVS338

Lovly regards Tokboy:)

Looks fine to me. I say WGR should be access point setup ,LAN to LAN connection and you are all good

OK. Thanks :)

I think the WGR is a access point now.
I folowd a instruktion i found on a netgears support page.

So thx again!

Love Tokboy :p

Your welcome