NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Client Isolated Between Router and Satellites
Hello. Can someone help me figure out what setting i need to change so that clients can communicate between orbi devices (satellite to satellite, satellite to router, and router to satellite)? I have two kids that play minecraft, and forwhatever reason, I cannot get them to join if ipads are on different orbi devices. I am on firmware 2.1.4.10. I have also had issues getting two Xbox Ones to see each other. One is wired to the router and one is wired to the satellite.Will installing too many satellites do more harm than good? More coverage than necessary overkill.
So I just moved into a new 2-story house that's 2600 square feet. Typical suburban home. Ideally, I should get a one router/one satellite system like the RBK40, RBK22, or even the RBK50. However, I'm looking at larger systems for sale like the RBK53 which is one router/two satellites and even the RBK44 which is one router/three satellites. And these are rated to cover 7,500 to 8,000 square feet respectively. My question is will installing a system that's rated to cover more area and installing that into a smaller home do more harm than good? Will installing too many satellites when you don't need them give you better coverage or is it counterproductive?RBR40 Router dropping Arris TM822A, I think
I bought an Orbi RBK33 system with RBR40 router last November. Intially, everything was fine, but somewhere along the way it appears the router decides to drop it's connection to the modem (perhaps starting in December). At least, I think this is the problem. I see my WiFi router isn't listed as an available network from all the devices I use (phones, tablets, computer, roku). Sometimes, while monitoring the WiFi, I see our it disappear, come back and disappear again from my devices when having trouble. Most often, I have to cycle power to the router to get it to come back up. It might stay up minutes, hours or a week. It seems like when there is a rough period, it stays up closer to minutes than hours. FWIW I do have a technical background but my knowledge in this area is poor. I logged into my router and there are no new firmware updates to install for the router or sattelites. Perhaps there are other router settings to attend to? I am at a loss. I don't mind throwing money at this problem to replace either the router or modem, but I really would like some idea of which is the culprit before I take a guess. This is the system I purchased: NETGEAR Orbi Whole Home Mesh WiFi System with Tri-band – Eliminate WiFi dead zones, Simple plug-in setup, Single network name, Works with Amazon Alexa, Up to 5,000 sqft, AC2200 (Set of 3)Suggestions... Need to update my system?? R7000 & EX6200 to an RBK50???
Good day, I currently have a R7000 in my basement as my main router and an EX6200 as an extender on the main floor. I get pretty good coverage however the EX6200 seems to be failing a little more and think it may be time to replace either it or my whole system. Been looking at the OrbiRBK50 mesh system however keep on reading about how mesh systems operate and not sure if this may be in my best interest. I currently have my pool control system (aquaconnect) and phillips hue lights connected to my extender via eithernet cables. Now with the mesh system would I have to worry about the lights and pool system constantly jumping between the 2.5ghz and 5ghz bands (constantly disconnecting and re-connecting) or is there a way to lock those two particular items into a certian band so it doesn't connect/re-connect all the time???? Thoughts comments??? Please and thanksRBR50 synched with Satellite but cannot find
Firmware 2.1.4.10 Even though the Satellite lights is blue indicating 'synch' my router cannot find the satellite. On the mobile app it acknowledges the router but cannot find the satellite. I have done a cold reboot; power cycle down; etc.. no luck..i have 'synched' a couple fo times and each time i get a solid blue light. But when i try to add satellite on the application it cannot find. anyone have any thoughts how to resolve? thanks
