NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
stuck
4 TopicsDevices on my network stuck in Bypass login but I have no bypass login account
Hi all, Thanks for reading. I had Parental controls working fine for a year. Now disaster. The router has changed the access level of a number of devices on my network. It has set a number of them to Bypass Login, although I have no Bypass Login acount. This includes devices like my TV, printer and Chromecast. I have looked through the community issues and a couple have similar problems but the thread stops with a rep giving a boilerplate answer about logging on to your Bypass account thru Genie. Obviously I can't do this from my TV, printer, Chromecast or Linux virtual machine etc. I have disabled and re-enabled Parental Controls. I have created a Bypass login account and deleted it. At the moment I've had to turn off all Parental Controls to even use my devices. Not ideal with young kids, and (as with many) was one of the selling points of buying the router. The problem was triggered when I temporarily disabled access (access control on genie network map) to my linux VM, and it would not boot without the network. As I disabled this on the network map I could not re-enable network access for the device because it was not on the network map any more because it would not boot without the network! So I went into the access control through the router web interface, and turned access control for that MAC address back on. That seems to have triggered the Parental Controls to get messed up for everything. It's a pain that you have to do some things through Genie and others thru the web interface (and yet others thru OpenDNS). Any ideas? Dave10KViews1like78CommentsReadyNAS RN104 stuck and not working after 6.7.4 firmware install
Hi everybody, after the last 6.7.4 firmware update my RN104 has strange behaviour. Sometimes it gets stuck and the only way to reboot it is to pull the AC plug. The front button or the back reset button are doing nothing. I suppose it mostly happens in the morning according to scheduled reboots, but I'm not sure... Any suggestion about it? Thanks a lot5.5KViews0likes18CommentsNV+ Stuck on (hangs on) Booting...
It's actually a RND 4000 v3 (RAIDiator 4.1.15) 4x seagate Barracuda 2TB. I think it's RAID 5 (I know I'm supposed to know, but I don't... not for sure anyway) Hi there. My NV+ is stuck on Booting...Even with browsing the discussions on 'stuck on booting' voor similar devices, I'm stuck with the next step myself. After it hangs, it will only power dwon by pulling the plug. No remote acces possible. I tried the booting with FW update option... that didn't work.... FW updated o.k. I guess, but it got stuck on Booting.... again. Same thing for the Memory-test option. After the powering-down (pulling the plug again) I numberd the drives and ran them through Seatools on my PC, performing the Short Generic test. Numbers 1,3,4 passed OK. No. 2 makes some worrying clicking noises after being connected. Test won't run (stuck at 0% at first test, the 'outer scan'). I guess that disk is completely dead. So what is next? Most interested in saving data of course. (yes I do back up regularly, but even the most recent stuff is worth saving). Any advice greatly apreciated. JasperSolved3.2KViews0likes4CommentsReadyNAS 314 stuck on 'Booting...'
Hello, After powering on my device, it will go past the welcome screen then freeze on the 'Booting...', fans are working and device otherwise seems to be working. Any suggestions on what could be causing this? I've tried accessing the boot menu but have only got as far as the boot menu screen and haven't been able to access individual menus.3.6KViews0likes5Comments