- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: GS108Ev3 port based VLAN cannot be deactivated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I wanted to use FritzBox mesh with repeaters using GS108Ev3 as switch. So I tried to deactivate VLAN at the Switch but I can't. It keeps port based VLAN activated and obiously this is the reason why it does not work with FritzBox mesh (others without VLAN works fine).
I even tried this
- I restarted the switch - didnt work
- I disconnected power - didn't work
- I reseted the original configuraiton via web configuration - didn't work
- I reseted via hardware reset button - didn't work
- I loaded the latest firmware - didnt work.
So, are there any other option? Or do I have to return the hardware because it is still garantee on it.
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Firmware Update auf die Englische Version behebt den Fehler. Zurück auf Deutsch ist der Fehler wieder da. Es scheint einfach nur die Deutsche Firmware defekt zu sein.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
Netgear plus switches offer the following VLAN configurations:
Basic 802.1Q-based VLAN: If you do not need custom tagging on a port, you
can use a basic 802.1Q-based VLAN. When you use a basic 802.1Q-based VLAN,
VLAN 1 is added to the switch and all ports are assigned as untagged members
of VLAN 1. You can then assign a port to a different VLAN in a range from 1 to
4093, but the port can belong to a single VLAN only.
Advanced 802.1Q-based VLAN: If you need custom tagging on a port, you
must use an advanced 802.1Q-based VLAN. When you use an advanced
802.1Q-based VLAN, VLAN 1 is added to the switch and all ports are untagged
members of VLAN 1, but you can tag or untag ports, remove ports from the VLAN,
assign ports to different VLANs in a range from 1 to 4093, and manage port
PVIDs
There is no dumb VLAN-less-config. Advanced 802.1Q-based VLAN does the job if you need just one network - this makes up a config without port based VLAN as per your requirements.
Provide any references by AVM that such a config should not be workable please.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
You mean like this?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
Tja und das ist leider nicht möglich. Ich kann 100x auf "Deaktiviert" drücken. Es bleibt immer aktiviert. Auch Reset, Werkseinstellungen laden usw. selbst Firmware Update. Der einfache Modus bleibt immer aktiviert.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: GS108Ev3 port based VLAN cannot be deactivated
Ja, das weiß ich. Mir sind VLANs schon klar und ich kenne diese Switche. Aber ich kann die Port-Varianten am GS108 weder ausschalten noch richtig einschalten und konfigurieren. Wie schon schrieb kann ich das Gerät zwar zurücksetzen, aber die Port-VLANs bleiben weiter halb eingeschaltet. Ich vermute dass das der Grund ist, warum der Switch nicht richtig funktioniert. Andere Netgear GS105v2 und GS116v2 funktionieren - dort lässt es sich ja auch komplett abschalten.
Gibt es noch eine weitere Option, außer die ich in meinem ersten Post beschrieben habe, die helfen?
Leider ist der Netgear Support eine Katastrophe. Nach 3 Monaten ist nur noch Chat erlaubt und der ist permament überlastet oder die Website funktioniert gerade gar nicht.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Firmware Update auf die Englische Version behebt den Fehler. Zurück auf Deutsch ist der Fehler wieder da. Es scheint einfach nur die Deutsche Firmware defekt zu sein.