NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBK22 Keeps dropping internet connection
I set up an rbk22 (Rbr20 + satellite) weeks ago and it worked fine.
The rbr20 is wired to my modem and the satellite wirelessly. Firmware is the latest on both (2.3.5.36)
In the last Week, it keeps dropping connection. Either the light is off but there is no internet or I notice it's violet.
I have to keep rebooting and it's driving everyone in the house crazy.
It started when my daughter got an iPhone 11 but that may just be a coincidence. That was the only thing that changed from the time it was working fine and started acting up.
I have circle installed and it also keeps discontinuing the premium subscription. I don't know if that's related though.
Mu-mimo and beamforming are Both enabled.
Fast roaming is disabled.
Hope this gets fixed soon. Driving me nuts
Thanks
The rbr20 is wired to my modem and the satellite wirelessly. Firmware is the latest on both (2.3.5.36)
In the last Week, it keeps dropping connection. Either the light is off but there is no internet or I notice it's violet.
I have to keep rebooting and it's driving everyone in the house crazy.
It started when my daughter got an iPhone 11 but that may just be a coincidence. That was the only thing that changed from the time it was working fine and started acting up.
I have circle installed and it also keeps discontinuing the premium subscription. I don't know if that's related though.
Mu-mimo and beamforming are Both enabled.
Fast roaming is disabled.
Hope this gets fixed soon. Driving me nuts
Thanks
14 Replies
What is the Mfr and model# of the ISP modem the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-routerWhat channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
Mozilla168 wrote:
I set up an rbk22 (Rbr20 + satellite) weeks ago and it worked fine.
The rbr20 is wired to my modem and the satellite wirelessly. Firmware is the latest on both (2.3.5.36)
In the last Week, it keeps dropping connection. Either the light is off but there is no internet or I notice it's violet.
I have to keep rebooting and it's driving everyone in the house crazy.
It started when my daughter got an iPhone 11 but that may just be a coincidence. That was the only thing that changed from the time it was working fine and started acting up.
I have circle installed and it also keeps discontinuing the premium subscription. I don't know if that's related though.
Mu-mimo and beamforming are Both enabled.
Fast roaming is disabled.
Hope this gets fixed soon. Driving me nuts
Thanks- OK i tried a trial and error process.
I first turned off the satellite and the main rbr20 unit has been working fine for 24hours now. So it must be the connection to the satellite that is causing the problemPlease give feedback to the question presented.
- What is the Mfr and model# of the ISP modem the NG router is connected too?
-Prolink H5204NK
What is the size of your home? Sq Ft?
- 1,980 SF (3 stories. Signals mostly needed in 2nd floor so both router and satellite are in the 2nd floor
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
- 10 ft
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
2.4= auto
5 = 48
Any Wifi Neighbors near by? If so, how many?
I can see signals from 2 neighbors when in the ground floor, but none on the 2nd floor where the or is area
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
Will try these
Mozilla168 wrote:
What is the Mfr and model# of the ISP modem the NG router is connected too?
-Prolink H5204NK
This is a modem/ router built in already:
http://www.rivijayaweera.com/public_html/?p=1108
This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
What is the size of your home? Sq Ft?
- 1,980 SF (3 stories. Signals mostly needed in 2nd floor so both router and satellite are in the 2nd floor
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
- 10 ft <This is too close to the RBR. 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
2.4= auto
5 = 48
Any Wifi Neighbors near by? If so, how many?
I can see signals from 2 neighbors when in the ground floor, but none on the 2nd floor where the or is area
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
Will try these
