NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

DSC829's avatar
DSC829
Aspirant
Mar 10, 2021
Solved

Orbi RBR-50 - unstable connection and slow speeds

I have an RBR 50 and 2 RBS50 satellites and 1 RBS50Y outside. The router is  connected through a Gigaclear router in bridge mode through a Vigor Draytek firewall. 1 RBS50 is connected via Ethernet (n...
  • DSC829's avatar
    DSC829
    Mar 13, 2021

    So in the end i did another factory reset, rolled them all back in the firmware and then did the updates again and reconnected all the satellites one a time. After a lot of playing around it seems to have stabilised but we'll see.

Ha_Ku_Na's avatar
Ha_Ku_Na
Luminary
Mar 10, 2021

I suggest to update all RBS manually to the latest FW.

-> Download the FW from the support webpage

 

Then connect to one of the RBS's via a browser:

http://ip-of-the-rbs

 

You find the ip's of the satellites in the webadmin GUI (http://orbilogin.com)

After the update, power off the RBS for 1-2 minutes, then let them start and connect (one by one, until they are connected successfully).

vajim's avatar
vajim
Master
Mar 10, 2021

Blanca_O 

 

Here's another for your files

 

Ha_Ku_Na wrote:

I suggest to update all RBS manually to the latest FW.

-> Download the FW from the support webpage

 

Then connect to one of the RBS's via a browser:

http://ip-of-the-rbs

 

You find the ip's of the satellites in the webadmin GUI (http://orbilogin.com)

After the update, power off the RBS for 1-2 minutes, then let them start and connect (one by one, until they are connected successfully).

 

 

 

DISCLAIMER:
please ignore posts from user vajim.
He is just acting like a bad troll here in the forum.
Unfortunately the moderators are not taking any actions against that.

the truth hurts