NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR50 - Attached devices gone really wacky
I have successfully used the "Attched Devices" capability by managing names and other device info to monitor and manage my WiFi devices. For no apperent or obvious reason this info has gone completely worng (see attached).
Devices from #13 onward now show:
Odd numbers, and devices numbers in the "Device Name" field
"-----device: xx- in place of the IP address
The IP address in place of the MAC address
Connection all show as "Unkown"
What on earth is going on here?
11 Replies
"Wacky" is a kind way to put it. There are three tables in the Orbi router which map the device MAP address into an IP, a device "name", and a device "type". Your tables are messed up.
My first try would be to power off the router and satellites. Power on the router and wait for the ring light to go off, and then do the same to the satellites. If this does not work, then:
You have two choices for how to get it back to normal (a) do a "factory reset" and enter the information again, or (b) make up a set of telnet commands to enter the tables in bulk. I keep a text file with the telnet commands for the next time I have to perform a factory reset. I am not 100% certain this will work because something has gone terribly wrong and more may be corrupted than just these three tables.
Honestly, since you are starting from scratch, it is probably faster and simpler to just type everything in.
Thanks for the info.
The power off and back on did not work.
I suppose factory reset is next option.
This really sucks, getting really tired of the Orbi and it's shananigans now. Maybe time for a change. I've had it now for 3 years and it is starting to "break" with random disconnections, poor connections and now this.
What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?What devices do you have connected?
What browser are you using? Try a different broswer like IE11, Firefox or Opera...
GASkinner wrote:I have successfully used the "Attched Devices" capability by managing names and other device info to monitor and manage my WiFi devices. For no apperent or obvious reason this info has gone completely worng (see attached).
Devices from #13 onward now show:
Odd numbers, and devices numbers in the "Device Name" field
"-----device: xx- in place of the IP address
The IP address in place of the MAC address
Connection all show as "Unkown"
What on earth is going on here?
Router Firmware Version
V2.3.1.60Bell HomeHub 3000
Devices (30-35) PC's, Alexa's, Cameras, Phillips Hue, Sonos, Tablets, Printer, WD storage device.
Browsers tried - Chrome, Firefox, Vivaldi, Edge.
Your ISP modem already has WiFi and built in router. What mode is the modem working in? Modem or router mode?
This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktopMight need to factory reset the RBR and setup from scratch if a power OFF of the RBR for 30 seconds doesn't seem to help any.
Just fyi.... tried the complete reset with a manual flush of the firmware. No luck!
On the plus side I now have a support ticket and they are trying to help, no resolution just yet.
This seems to be a pretty serious problem which makes managing attached device 100% impossible from the Orbi dashboard.
WHy does the iOS and Android app show different data for the connected device than the dashboard does?
The 2 apps are still completely current and reflect accurate device info.
GASkinner wrote:WHy does the iOS and Android app show different data for the connected device than the dashboard does?
The 2 apps are still completely current and reflect accurate device info.
Just a guess, but the smartphone apps and the Orbi web interface may be done by entirely different programmers who don't talk to each other. It certainly does not enhance their credibility.
Oh man! I just cannot catch a break on this issue.
I used to love Orbi so much... now not so much.
Any progress on this?
GASkinner wrote:I have successfully used the "Attched Devices" capability by managing names and other device info to monitor and manage my WiFi devices. For no apperent or obvious reason this info has gone completely worng (see attached).
Devices from #13 onward now show:
Odd numbers, and devices numbers in the "Device Name" field
"-----device: xx- in place of the IP address
The IP address in place of the MAC address
Connection all show as "Unkown"
What on earth is going on here?
