NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Webcam streaming issues
I am having issues with streaming webcams from a university campus. These stream perfectly from every location I visit with my computers and phones: coffee shops, work place, other peoples homes. They stream fine over cellular data as well.
However, none of my devices will stream these cams at home on my wifi using my Orbi. I have disabled all parental controls. I have latest firmware.
I do not have issues with other webcams, at least I have never encountered any issues and I stream a lot.
I think its *FIXED*!! Thanks to everyone for the advise and support.
I had unplugged and cycled my Spectrum modem many times. Today I decided to RESET it. Well, that did the trick. It seems crazy to me but that was it. How very odd.
Thanks again to everyone in the NG support pages!
17 Replies
What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?What devices do you have that you use to stream from these cameras?
What is the size of your home or apt? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-routerWhat channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).I have firmware V2.5.0.38
I have a Spectrum modem PC15
Orbi is in Router mode.
I have a 3000 sq ft house and the two satelites are approx 30-40 ft from the base, but the devices all connect to the base (a whole other problem).
All devices have trouble in my home with thsi particulr sites webcams., Android phones, Lenovo desktop, Dell laptop.
Settings are:
WIRELESS SETTINGS (GENERAL)
Region North America
2.4G Channel Auto ( 7 )
2.4G Mode Up to 400 Mbps
5G Channel 36+40+44+48(P)
5G Mode Up to 866.7 Mbps
All these are enabled:Enable Daisy-Chain Topology
Explicit BEAMFORMING - Boosts WiFi speed, reliability, & range for all mobile devices
Enable MU-MIMO
Enable Fast RoamingI will try disabling a few of the settings you mention. I have tried these in the past but will again.
ScottWay, you are running v2.5.0.x firmware, and it was retracted by Netgear after many bugs were found. NG disabled autoupdate in recent releases due to the issues that it has caused. I suggest manually upgrading your RBR50 and RBS50 to v2.5.1.8 available from https://www.netgear.com/suppzio fort/product/RBK53.aspx#download
1. Backup your settings of the RBR50 router (in case you need to restore or revert)
2. Download the zip file for both the RBR50 router and RBS50 satellite
3. Unzip the files
4. Manually upgrade the firmware on the RBS50 satellites first using the RBS-v2.5.1.8.img file
5. Finally, upgrade the firmware on the RBR50 router using the RBR-v2.5.1.8.img file
ScottWay wrote:I have firmware V2.5.0.38
I have a Spectrum modem PC15
Orbi is in Router mode.
I have a 3000 sq ft house and the two satelites are approx 30-40 ft from the base, but the devices all connect to the base (a whole other problem).
All devices have trouble in my home with thsi particulr sites webcams., Android phones, Lenovo desktop, Dell laptop.
Settings are:
WIRELESS SETTINGS (GENERAL)
Region North America
2.4G Channel Auto ( 7 )
2.4G Mode Up to 400 Mbps
5G Channel 36+40+44+48(P)
5G Mode Up to 866.7 Mbps
All these are enabled:Enable Daisy-Chain Topology
Explicit BEAMFORMING - Boosts WiFi speed, reliability, & range for all mobile devices
Enable MU-MIMO
Enable Fast RoamingI will try disabling a few of the settings you mention. I have tried these in the past but will again.
ScottWay wrote:I am having issues with streaming webcams from a university campus.
However, none of my devices will stream these cams at home on my wifi using my Orbi. I have disabled all parental controls.
LOVE the campus webcams. (They stream fine on my Orbi RBR50.) Would it be OK to ask which web browser is being used to stream these cams? (on which platforms?)
I would be sort of shocked to think that Disney Circle could ever find these streams objectionable.
As FURRYe38 pointed out, that particular firmware has been "disgraced" and users are encouraged to update to 2.5.1.8. I sincerely doubt that the Orbi firmware is the cause of this specific problem, but there is no sense remaining on firmware with "known issues" of any kind.
Could you explain more about "what happens" when you attempt to stream these feeds?
