NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
changing auto-voip type broke stack
I had a stack of two of these: !System Description "GSM7352Sv2 48-Port Gigabit Layer 3 Stackable Managed Switch with 2 10G SFP+ port, 10.0.0.53, 01.00.35" !System Software Version "10.0.0.53" e...
tech support by email told me how to solve this.
from cli: reload
As expected the switched restarted so office was ready for that.
More info:
before changing the auto-vlan type , I had saved the running config to start up , along with saving the text settings to tftp.
the one remaining switch is running good - all vlans report working phones, printers and workstations.
ALSO from java/web device view - Back of switch : Only the working switch shows a stack connection slot green. Power and serial are green on both
Hi robfantini,
Welcome to the community! 
Could you please answer below quesitons, we need more detailed information for further analysis:
1. What's the auto-voip VLAN ID? Is it a new created VLAN or exsit VLAN?
2. Could you provide the auto-voip CLI command that you execute?
3. It's will be better if you can provide us the configuraiton of the Switch.
How do I send configure files from my Managed Switch to NETGEAR community moderators?
http://kb.netgear.com/app/answers/detail/a_id/3143
Regards,
EricZ
NETGEAR Employee
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
