NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
robfantini
May 05, 2017Aspirant
Auto VoIP on gsm7352sv2
Hello
I've got some questions regarding auto voip on our switches. Product Name : GSM7352Sv2 48-Port Gigabit Layer 3 Stackable Managed Switch with 2 10G SFP+ port, 10.0.0.53, 01.00.35
The documentation and switch do not seem go together.
so from cli this is supposed to work per 7000_series_SWA_8.0.3_1Nov10.pdf
(Config)# auto-voip all ^ % Invalid input detected at '^' marker.
however these are the avail options:
(Config)#auto-voip ? oui Configure auto VoIP OUI oui-based Configure OUI based auto VoIP protocol-based Configure call control protocol based auto VoIP vlan Configure auto VoIP VLAN
Could someone direct me to the correct documention for our switch?
thanks
- Retired_MemberMay 08, 2017
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
7 Replies
- robfantiniAspirant
Note this is at end of that last post: 'Model: M5300-52G3 (GSM7352Sv2h2)|ProSAFE '
it is not a 'h2' just 'GSM7352Sv2' . I assume those are different models.
- Retired_Member
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
- robfantiniAspirant
thank you that does help.
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!