NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Connect 2 gs324T switches with 2 vlans both together.
So here is my problem.
I have two GS324T switches and i have made two vlans on each switch both the same.
1t/m12 + 25&26 are my LAN ports and 13t/m 24 are my WAN ports.
The software version is 1.0.0.17
When i connect both switches in the lan vlan then i can see everything that i have in both switches.
But when i put in my Internet line in one of the switches in my WAN vlan then i dont have internet.
When i pull the cable out of the lan vlan i do have internet connection on both.
Has someone had the same issue?
4 Replies
Based on the information supplied, I'm a little bit lost what makes up the two VLAN, what IP subnets are intended, and how the VLANs with multiple ports are interconnected.
I understand! Thanks for replying. I have made a small drawing so i hope this makes it more clear.
What i wanted to create were just simple two vlan's that act like seperate switches inside the 324.
But im not a network professional and i have had struggles with this!Still unclear about the 1t/m12 13t/m24 notation.
To establish a VLAN 1 resp. a VLAN 13 "LAN" connection, the ports need to be untagged to the respective VLAN ID and the PVID must be set accordingly, too.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
