NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS305/8E. Unable to save VLAN config.
I have GS305E and GS308E switches (Firmware 1.0.0.11) that I configured with VLANs. If I try to make a change, when I access "VLAN - 802.1Q - Advanced - VLAN Configuration" I find "Disabled" and if ...
These switches come confusingly with different VLAN configs and settings.There are other VLAN config variants, different from the "VLAN - 802.1Q - Advanced - VLAN Configuration". When changing to this mode, the previously existing dot1Q (when I remember right probably all VLAN configs as rh UI says) must be redone. Suspect you had some basic 802.1q config or the plain port based VLAN settings in place before.
These switches come confusingly with different VLAN configs and settings.There are other VLAN config variants, different from the "VLAN - 802.1Q - Advanced - VLAN Configuration". When changing to this mode, the previously existing dot1Q (when I remember right probably all VLAN configs as rh UI says) must be redone. Suspect you had some basic 802.1q config or the plain port based VLAN settings in place before.
I understand, I need to select VLAN - 802.1Q - Advanced - VLAN Configuration.
This is how I see the previous configuration.
Thank you. I was "lost" in the menu.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
