Help with bricked GSM7328Sv1 Switch

Hello,

I have managed to update my netgear gsm7328 and 528s

I send the update file via ftp.

after all then i did a save of the config.

went to my console window and kept on rebooting.

selected 2 for the start boot menu options and then selected option 11 Restore configuration to factory defaults (delete config files) to delete the boot

when i got the boot option after few minutes i pressed 1 and the new firmware was loaded

hope this will help

below is what i did

NetGear Boot code......
Version 01.00.33 02-03-2011

CPU Card ID: 0x508541

Select an option. If no selection in 3 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2

Boot Menu

Options available
1 - Start operational code
2 - Change baud rate
3 - Retrieve event log using XMODEM
4 - Load new operational code using XMODEM
5 - Load new operational code using USB
6 - Display operational code vital product data
7 - File system directory listing
8 - Update boot code
9 - Delete backup image
10 - Reset the system
11 - Restore configuration to factory defaults (delete config files)
12 - Activate Backup Image
13 - Password Recovery Procedure
14 - Upload a file through XMODEM
15 - Download a file through XMODEM
[Boot Menu] 11

Are you SURE you want to delete the configuration? (y/n):y
[Boot Menu]
[Boot Menu] 1

Operational Code Date: Fri Sep 5 22:46:53 2014
Uncompressing.....

Adding 0 symbols for standalone.

File: cardmgr_cnfgr.c, Line: 354, Error 1446002689 (0x56304001)
Instantiating /download as rawFs, device = 0x20001
Formatting /download for DOSFS
Instantiating /download as rawFs, device = 0x20001
Formatting...OK.
Instantiating RamCP: as rawFs, device = 0x30001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x30001
Formatting...OK.

(Unit 1)>

Applying configuration, please wait ...

Applying Global configuration, please wait ...

Applying Interface configuration, please wait ...

User: