How to Update POE-firmware on GS724TPP

---

TimesEnemy wrote:

1) Under System > Management > Versions it shows Model Name: GS724TPP, Boot Version: 1.0.0.8, and Software Version: 2.0.6.3.  Should this Boot Version be the same as the Software Version?

---

No.

---

TimesEnemy wrote:

2) Under System > PoE > Basic > PoE Configuration it shows Firmware Version: 1.8.0.5.  Should this PoE Firmware Version be the same as the above Software Version of 2.0.6.3? 

---

No.

---

TimesEnemy wrote:

If not, where do I find Boot Firmware updates?

---

Bootloader images would be made available along with a firmware distribution, and the update requirements (automatic update, or mandatory bootloader before the firmware installation would be documented. Mind your step: On older and more complex switches, always check the complete firmware update release notes, sometimes the notes of required bootloader updates went lost over time. 

---

TimesEnemy wrote:

If not, where do I find PoE Firmware updates?

---

If PoE controller firmware updates are made available, these are typically included with the firmware images, uploaded and applied during the firmware update process - very customer friendly on these Smart Managed Pro switches.

---

TimesEnemy wrote:

 

3) For information purposes, under Maintenance > File Management > Dual Image > Dual Image Status it shows Image1 Ver: 2.0.6.3, Image2 Ver: 2.0.6.3, Current-active: image1, Next-active: image1.

---

You can also choose the firmware image (version) to become active after the boot, or in case return to the previous version. A nice feature.

Regards,

-Kurt

PS. As we talk about a Smart Managed Pro switch, I'll ask a moderator to move the thread accordingly