Is there an updated VPN guide for Windows 10? (FVS336Gv2)

I will try the suggested setup from the link but won't have time until next week.  I will try to update the thread with my results.

So I finally got around to trying to fix the issue.  I took a Udemy course on VPN and this helped me find the more detailed settings for VPN that are pretty buried in the current version of Windows 10.  I iterated through trying all variations of those settings in the Windows 10 client and all of the stuff I could find for the Netgear side and it is still not working.  I finally figured out all the right settings using the Netgear VPN client but we have used all of our licenses and would like to use the Windows 10 client for the few employees that don't have the Netgear client software.

Any further suggestions would be appreciated.

JohnC_V

Back on this again.  We are having troubles.  When I use the Prosafe client from home, the connection is pretty slow.  I have another user I am setting up and I used the same parameters as mine but his won't connect.

Back to using the Windows 10 built-in client:

More googling found this Microsoft doc.

https://www.microsoft.com/en-us/download/details.aspx?id=54434

In section 4.1 it states that it only supports DH Groups 14, 19 and 20.  When I am trying to setup my IKE policy on the firewall, only Groups 1,2 and 5 are available.  It seems like this means I can't use the Windows 10 client with IKEv1.  Is that correct?

Thanks

JohnC_V

Also, I just found this:

https://www.netgear.com/support/product/FVS336Gv2.aspx

What does this mean?