NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
M4250-10G2XF-POE++ MANAGED SWITCH, Not powering the ports
Not powering the ports. Last night the switch was powering the ports, but I could not connect to it in any way (console, oob, switch port with the recommended IP's 192.168 and 169.254). This morning picked up a console cable but unable to connect.
The switch keeps running through it's power up self test, flashing the ports (amber light), but never completes the self-test. Pressed the reset button for 5 seconds and nothing happened, still running through self-test. Unplugged the power at least 3 times for ~30 seconds to reset it and did not work.
Any ideas or assistance would be greatly appreciated!
Thank you,
alavila
1 Reply
Nothing on the serial console (physically USB serial port)?
Well possible somehow, the boot loader was corrupted. Time to contact Netgear support, ideally via https://my.netgear.com/.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
