NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
many of these in log "Spanning Tree Topology Change Received"
Hello at Monitoring > lags , lag 11 has had some "Packets received with Errors" . now there are about 20. last week 8 . so I set up logging to go to a rsyslog server . just lag 11 has ...
Yes, we have got the detailed info. Thanks for your immediately response.
1. According to the memory log, we found that port 1/0/29 and 2/0/29 is flapping. Could you please double check these two port status?
2. According to spanning tree log, there is loop topo change. Could you please provide the network topo to us for further analysis?
3. I am afraid the traffic wasn't interrupted by these spanning tree log, right? As I think these log is normal, just dut to STP protocol detect topo tree changing, and adjust forwarding path.
Hi robfantini,
Welcome to the community!
These spanning tree log is due to topo change, please check whether there is port flapping or not in the switch?
Hope it helps!
Regards,
EricZ
NETGEAR employee
Hello
Could you please advise on were to check for 'port flapping or not in the switch '
Ok, please send the tech-support file to us. As this file contain more detailed info.
How do I send tech-support files from my Managed Switch to NETGEAR community moderators?
OK I just sent what I could AND
Note on my switch there are not options for ' full memory dump ' and ' crash logs ' . In case you have a suggestion for those.
thank you for the help so far!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
