NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
stack switch configuration sync
Hello we have a stack of 3 switches. **Question**: When configuration a configuration change is done, do the settings automatically go to the Standby switches? I ask because one ti...
Hi Rob
I believe you have a stack of Fully Managed switches, M4300 series.
Yes, configuration is shared across the stack. When there is a configuration change, the settings in running configuration are synchronized across all switches in the stack (stack master = management unit; backup master = standby management unit; stack members = slaves). The same, but independently, the startup configuration file is also shared across all switches in the stack.
But, in a Fully Managed switch, any configuration change must saved in order to see the "running configuration" (show run) saved as "startup configuration" file that will survive the reboot.
I am afraid the configuration wasn't saved in your instance below. I hope this helps.
Regards,
Hi Rob
I believe you have a stack of Fully Managed switches, M4300 series.
Yes, configuration is shared across the stack. When there is a configuration change, the settings in running configuration are synchronized across all switches in the stack (stack master = management unit; backup master = standby management unit; stack members = slaves). The same, but independently, the startup configuration file is also shared across all switches in the stack.
But, in a Fully Managed switch, any configuration change must saved in order to see the "running configuration" (show run) saved as "startup configuration" file that will survive the reboot.
I am afraid the configuration wasn't saved in your instance below. I hope this helps.
Regards,
thank you for the answer. I must have not done the save.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
