NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Voice VLAN trinking M5300 to S3300 with Auto-VoIP
I just finished getting my VLAN trunking and Auto-VoIP working to a new S3300 switch from a trunked port out of my M5300, but I had a quite a time getting it to work. For the longest time, I coul...
Hey,
As you know, OUI based Auto-VoIP assigns devices to a VLAN based on the MAC address (in fact based on the OUI, not the entire MAC address).
Protocol based Auto-VoIP assigns devices to a VLAN based on the type of traffic they send. It would probably be something like "If the device is sending traffic to destination port 5060, then assign the device to VLAN x " (5060 is the common VoIP port).
You should not use both these at the same time, which could easily be why your config was not working :)
Cheers
Hey,
As you know, OUI based Auto-VoIP assigns devices to a VLAN based on the MAC address (in fact based on the OUI, not the entire MAC address).
Protocol based Auto-VoIP assigns devices to a VLAN based on the type of traffic they send. It would probably be something like "If the device is sending traffic to destination port 5060, then assign the device to VLAN x " (5060 is the common VoIP port).
You should not use both these at the same time, which could easily be why your config was not working :)
Cheers
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
