NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
2 vlans on same ports traffic shaping
Hi,
I have 2 vlans (101 and 102) on tagged ports 9,10,11 and 24. I would like to limit outgoing and incoming traffic for them:
vlan 101: 1 Mbit outgoing 5 Mbit incoming
vlan 102: 3 Mbit outgoing 15 Mbit incoming.
Is it a possible think via GS728TP? If yes, would you help me?
Many thanks
Hi @Wolf1965,
Welcome to the community!
There is no option in the GS728TP web-GUI wherein you could directly specify a traffic limit for both outgoing and incoming for each VLAN. However, you can configure CoS (Class of Service). Kindly read pages 139-141 on the GS728TP software administration manual here about CoS Configuration.
Also, let me share the article below for further reference:
Rate Limiting / Traffic Shaping
Regards,
DaneA
NETGEAR Community Team
2 Replies
Replies have been turned off for this discussion
Hi @Wolf1965,
Welcome to the community!
There is no option in the GS728TP web-GUI wherein you could directly specify a traffic limit for both outgoing and incoming for each VLAN. However, you can configure CoS (Class of Service). Kindly read pages 139-141 on the GS728TP software administration manual here about CoS Configuration.
Also, let me share the article below for further reference:
Rate Limiting / Traffic Shaping
Regards,
DaneA
NETGEAR Community Team
I just want to follow-up on this. We’d greatly appreciate your feedback.
Otherwise, if ever your concern has been resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Regards,DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
