Forum Discussion

Aspirant

Oct 03, 2015

Solved

Can't get GS110TP to work as simple as GS105E

For my work I have to check services going over utp links in different vlans. I used a GS105E with its mirror function. I can connect the GS105E without any vlan configuration and all traffic of doze...

gs105e

GS110TP

Installation

APDK66
Oct 11, 2015
So I understand I can't use this switch for what I want. I need to check uplinks containing 250+ vlans.
Besides the different configuration effort each time it has a limit of 64 vlans.
I have to look for another solution.

DaneA

NETGEAR Employee Retired

Oct 04, 2015

Hi APDK66,

Kindly answer the questions below:

a. What is the current firmware version of the GS110TP?

b. Have tried to reboot the GS110TP?

c. Have you tried to perform a factory reset on the GS110TP?

I look forward to your response. Welcome to the community! :smileyhappy:

Regards,

DaneA

NETGEAR Community Team

APDK66
Aspirant
Oct 05, 2015
Hi DaneA,

thanks for your answer,

The switch has firmware version 5.4.2.19. I did reset and do a factory reset.
The current situation under test:
- factory default setting
- link with vlan 4, 6 and 7 connected to port 1 & 2 of the switch.

no traffic passes the switch.

Arjan
- DaneA
  NETGEAR Employee Retired
  Oct 05, 2015
  Hi APDK66,
  
  Here are my follow-up questions below:
  
  a. Are ports 1 and 2 of the GS110TP connected to another switch?
  
  b. What are the port members of VLANs 4, 6 and 7?
  
  Kindly post a screenshot of your detailed network setup.
  
  Regards,
  
  DaneA
  
  NETGEAR Community Team
  - APDK66
    Aspirant
    Oct 05, 2015