NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

MISSION's avatar
MISSION
Aspirant
Oct 07, 2016
Solved

DISABLE POE ON A PORT

Been reading the help manual and i cantfind where i can disable the POE on a single port.

My port (24) connects to another switch that doesnt need POE.

 

i have been in system/poe/poe port configuration.

But there is nothing in there to allow me disable it on the port. only admin level, priority level, timmer and power limit.

 

Is this a feature not available on this model or have i to set the power limit to 0

 

the switch has the latest firmware installed..

 

 

 

  • Hi MISSION,

     

    Welcome to NETGEAR community!

     

    The "admin mode" of PoE is only for PoE power control not the physical link.

     

    In other words,After you disable "admin mode" of PoE on port(24).

    The port will work correct and communication with another switch with physical link without PoE function.

     

    So you can disable it from System->PoE->PoE port configuration on your port(24) and go ahead your networking.

     

    May the suggestion help you. :smileyhappy:

     

    Regards,

    Daniel.

     poe.png

2 Replies

  • JohnRo's avatar
    JohnRo
    NETGEAR Employee Retired

    Hello MISSION, 

     

    Welcome to the community! 

     

    AFAIK the ports are auto-sensing, they will enable PoE once a PoE packet request has been sent by the device connecting to it. If the device connected to the PoE port  supports 802.1af it will send a packet request for the PoE port to be enabled and supply power. This is the reason why I believe the option to enable or disable it is not necessary. 

     

    Thanks, 

  • Hi MISSION,

     

    Welcome to NETGEAR community!

     

    The "admin mode" of PoE is only for PoE power control not the physical link.

     

    In other words,After you disable "admin mode" of PoE on port(24).

    The port will work correct and communication with another switch with physical link without PoE function.

     

    So you can disable it from System->PoE->PoE port configuration on your port(24) and go ahead your networking.

     

    May the suggestion help you. :smileyhappy:

     

    Regards,

    Daniel.

     poe.png

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More