NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS108PE Poe Power Cycling
I understand the Prosafe Plus switches do not have POE power control ability on each port so that you can cycle a single port. However I am wondering if the switch cycles all the POE ports power on r...
Welcome to our community! :)
That is correct. Once you reboot the switch, all POE ports will power up too. This will automatically power up any POE device connected to the switch.
Regards,
John
NETGEAR Community Team
When I reboot the GS108PE will it depower all POE ports and then repower them when it comes up, giving a power cycle to all ports?
mrswitch wrote:When I reboot the GS108PE will it depower all POE ports and then repower them when it comes up, giving a power cycle to all ports?
Yes. In fact this is the standard on most PoE switches.
Few/recent sophisticated Netgear PoE switch models introduced an "Uninterrupted PoE" feature which can be enabled if required: Keep PoE running even when rebooting the switch Software reset or reboot after firmware upgrade will not force PoE PD devices to power recycle. Factory default will still reset the PoE controller and pause PoE output while rebooting.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
