NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS108Tv3 - adding a static ARP entry - Error: Failed to Add ARP entry. IP subnet does not exist.
Hi All, recently I bought a GS108Tv3, which I use with default factory settings, just to connect my router/NAS/PCs on a local network. My NAS (with static IP) is set to Wake on Unicast, so whenever a...
Valid point DaneA !
DaneA wrote:... it says that in the IP Address field, you must enter the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. ...
In other words: The ARP entry can only be added in combination with L3 inter-VLAN routing enabled. Re-thinking it, this does make some sense. At the same time it's confusing, because the switch core IP stack and the NAS are (in many basic network environments) on the very same VlAN and subnet.
Hi Everybody,
Thanks for the answers, I'll give it a try a soon.
As I'm a complete newbie to setting up VLANs, I'll probably need some time to 'study'. :-)
regards,
mac_mat
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
