NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
My GC510PP config missing "ip address dhcp" for "interface vlan 4089", how to add it?
Below, is some part of configuration of my GC510PP Insight Cloud Managed Switch.
..... interface vlan 1 routing ip address dhcp exit interface vlan 2 routing ip address dhcp exit interface vlan 4089 routing exit auto-video exit
vlan 1 - clients can get their IP addresses from DHCP Server normally.
vlan 2 - clients can get their IP addresses from DHCP Server normally.
vlan 4089 - clients can't reach the DHCP Server.
I've checked and compared all other settings and found that "interface vlan 4089" has no "ip address dhcp".
So, I suspect this part of configuration that may caused the problem.
And my question is why and how to get it?
Please advise, thanks.
1 Reply
The
ip address dhcp
is "just" to allow the routing adapter for that VLAN to run on a DHCP client so it does get it's config from the adjacent DHCP server. Coplete unrelated to the DHCP ability for that VLAN I'd say.
Is there a DHCP server atached to that VLAN 4089?
Any specific reason for (kind of abusing) this default VLAN 4089?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
