NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear GS105PE - power available on PSE
This switch is powered throw port 5, by 802.3 af or 802.3 at. I want to use the port 3 and 4 for computers (no problem), and use port 1 to get back power in DC to provide power supply to an electric...
Hello Nicola31,
Welcome to the community!
You'll have to make sure that port 5 (PoE PD) is getting the correct amount of power. When port 5 (PoE PD) is powered by a device at 802.3at specification, you should see a green LED light (right side). See scenarios below:
If the PoE pass-thru is enabled you should get 19W with 802.3at/7.9W with 802.3af input power.
Thanks,
Hello Nicola31,
Welcome to the community!
You'll have to make sure that port 5 (PoE PD) is getting the correct amount of power. When port 5 (PoE PD) is powered by a device at 802.3at specification, you should see a green LED light (right side). See scenarios below:
If the PoE pass-thru is enabled you should get 19W with 802.3at/7.9W with 802.3af input power.
Thanks,
Hi Nicola31,
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved we encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The Netgear community looks forward to hearing from you and being a helpful resource in the future!Thanks,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
