NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS728TP v1 failed update
Can you tell me if it's possible to restore the GS728TP v1 after a failed update? The firmware was 6.0.1.14. I updated to the latest firmware 6.0.1.30 via SCC (Smart Control Center). SCC (Smart...
I updated to the latest firmware 6.0.1.30 via SCC (Smart Control Center).
SCC (Smart Control Center) reported that the firmware was updated and the switch would reboot.
While this isn't the root cause for this issue: The fine User Manual does from about 2012 - since first release more than a decade ago - not suggest using SCC. Only Web and FTP based uploads are supported.
How can I restore it?
Permitting TV bootloader was not destroyed, there might be some chance the bootloader falled back to tftp loading, probably due to a corrupted image load.
Probably the switch bootloader does fall-back to tftp, eg. due to a bad firmware image.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
