NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Issue with connectivity to a NAS connected to GS108T
I have installed a CTERA C200 NAS on my network with has a TWC Router (ADDIS) and it then feeds to my Netgear GS108T. The NAS requires the opening of ports 995 and 873 and I have setup the router to...
Hi,
I think I found the problem. The NAS had a different IP address. So I had to modify the port virtual server addresses to match the IP and that did the job.
Thx
Luis
I will check with the router/modem settings. I however see that the GT108 has port trigger settings. What are those for?
Luis
Hi,
I think I found the problem. The NAS had a different IP address. So I had to modify the port virtual server addresses to match the IP and that did the job.
Thx
Luis
Hello LuisB,
Glad you found the issue, the port trigger setting (if there is one included on the FW) is only for internal packets so this does not involve request coming from the WAN.
If you have more questions, please feel free to post.
Thanks,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
