NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

hassan_r's avatar
hassan_r
Aspirant
Oct 19, 2017
Solved

vlan between GS724Tv4 and virtualized pfsense

Hi pfsense router on esxi 6 host with 2 nics Ip 192.168.1.1/255.255.255.0 em0 asigned to wan (isp modem), and em1 asigned to lan, em1 connected to port 24 on Netgear switch GS724Tv4. Working perfe...
Troubleshooting
  • JohnC_V's avatar
    JohnC_V
    Oct 23, 2017

    hassan_r,

     

    This should work now on the setup that you have on the switch. Maybe there is something missing in the configuration of your router or even the trunk ports, you may also check that.

     

    Regards,

JohnC_V's avatar
JohnC_V
NETGEAR Moderator
Oct 20, 2017

Hi hassan_r,

 

Welcome to our community!

 

As per checking in here that your computer is still receiving an IP from VLAN 1. As I checked your configuration, the PVID is still set to VLAN 1 on port 20. Basically, If it is a T or TAGGED port, this means that this port was set to trunk. If it is UNTAGGED or U, then it will be an access port and you should also set the PVID to specific VLAN to where you wanted it to pass through.

 

You were also saying that you connected your computer to port 20. But the assignment that you had on the image was set to port 22.

 

You should've set port 20 - U, PVID 15 under Port PVID Configuration. You may also remove the VLAN TAG 15 on port 20 as it is already on PVID 15.

 

 

Regards,

 

 

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More