NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
VLAN routing on XS728T not possible?
I'm trying to do VLAN routing on a ProSAFE XS728T. When I go into Routing, VLAN, VLAN Routing, and add VLAN and IP address, I loose connection, and becomes unresponsieve. All the ports on this switch is still on VLAN 1.
I tried the same thing on a ProSAFE XS716T, and it works.
I had Netgear tech remote in and look, and he was getting the same results.
https://kb.netgear.com/24755/How-do-I-configure-VLAN-Routing-on-a-smart-switch
According to this article, XS728T should be able to do VLAN routing.
The switch is still on the factory default 192.168.0.239. The firmware is up to date.
I tried to do this on another 728T with same results.
Figured out the solution. Not sure why this matters, but after changing the default 192.168.0.239 to static, I was able to add VLAN routing.
1 Reply
Figured out the solution. Not sure why this matters, but after changing the default 192.168.0.239 to static, I was able to add VLAN routing.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
