NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
VLAN Set-up with WAX610, MS510TXPP, GS110EMX & pfSense
I'll start out by saying I am not a networking expert and have struggled thus far successfully to get a new home network using a homemade pfSense box to run. The intention of this was to increase se...
Let's keep it simple:
For the primary (typically also the mangement) network, run the trunks between the switches, to the security appliance, and to all APs [U]ntagged VLAN and set the PVID to the same number. All other network VLANs are run [T]agged.
On the APs side, configue all SSIDs (each representing a network), then associate each to the network VLAN you desire.
On the security appliance, define the networks you need accordignly with the network specific IP address, a subnet and the DHCP server for each network, and last but not least again the first network untagged, and all other networks as tagged for the trunk to the switch.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
