NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAC124 AP/router - cannot login
We have two WAC124s, both configured as access points and connected via ethernet to the router. These were straightforward to configure when we bought them and have worked well. However I recently t...
Typical "issue" when operating these WAC124 (or similar) in Access Point Mode - you can't use the http://routerlogin.com/ First reference to this is in the fine WAC124 User Manual https://www.downloads.netgear.com/files/GDC/WAC124/WAC124_UM_NEW_EN.pdf p.18.
Thank you both. Unfortunately I have already tried both these options, basically logging in via the device's IP address.
Both the WACs have been working fine, and still are, since they were set up about three years. I only tried to login to update the firmware, to find neither device could be accessed. I'm struggling to believe that both devices developed the same fault at the same time so I'm wondering if Netgear has changed the login process or criteria?
Many thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
