NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NETGEAR GS108LP Loss of power triggers restart
I am running a unifi wifi system over my GS108LP and noticed since I got it that whenever we have a short powercut, this usually happens when the washing machine starts pumping out water, I loose pow...
I am using 4x Access Point WIFI 6 Lite, the UPS I added due to the fact that we had these restarts, this isn't the cause unfortunately
MunichDSLer wrote:
I am using 4x Access Point WIFI 6 Lite
Ok, not near to the power limit.
MunichDSLer wrote:
the UPS I added due to the fact that we had these restarts, this isn't the cause unfortunately
Well possible a simple VFD (Voltage Frequency Dependent from Mains Supply) aka. standby- or offline-UPS will not become active until the AC power does completely fail, and won't make any difference if the voltage is dropping due to certain higher load on your installation. A VI (Voltage Independent from Mains Supply) aka. "line interactive UPS" and of course VFI (Voltage and Frequency Independent from Mains Supply) aka. "online UPS" would help keeping the power supply up.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
