NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
BR500 VPN to FVS318 site to site vpn
We just purchased a BR500 router and are trying to connect it to a FVS318. We have not been able to get the vpn connected. we are using firmware version 5.7.04 on the BR500. All of the authentication and encryption are the same on both boxes. Do we need to login to the insight portal to all this or setup a vpn group? do we need license?
9 Replies
How are you connecting? The FVS318 can't connect to the Insight System. You could do an IPSec VPN between the two, if the IPSec part of the BR500 works. I say this because the BR500 is missing the Client to LAN portion of its code.
Thanks. I am trying to use the IPSec part. I am having a ton of problems with it. it passes the first phase but not the second.
I ran IPSec between two FVS336 units for many years, until NETGEAR decided to no longer support them.
I have a FVS318, but never ended up using it. I do believe the internal setup screens are similar to the FVS336
It looks like the BR500 only supports Pre-shared key and Tunnel. I would select those on the FVS318. If you are getting through Phase 1, then the PSK is working. Phase 2 sets up the tunnel.
I had the FVS336 set to "both directions" on Direction/Type. It looks like the BR500 wants this to be specific. And they need to be set opposite at each end. And make sure that both ends use "Main Mode" as it is more secure.
And make sure the PFS is on at both ends and selected the same.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
