FR328S Firewall - Re-routing; server dying!

http://support.netgear.com/app/products/model/a_id/2372

for one this is such a old router so if you have faster broadband services with your cable ISP, you may want to change it.

been FR328 is still router , you should able to connect you cable modem to FR328. Now been you had FR328 was behind server with ICS (internet conniption sharing) you may need to change some other DHCP configuration when you are putting

cable modem- FR328- server and PC.

you will need to do power cycle cable modem and FR328 in squence.

1. turn off the cable modem and unplug ethernet cable 2. wait for few min (20min) 3. turn on the cable modem only and do NOT plug any ethernet cable 4. wait until all the light up on cable modem 5. ONLY after all the light is up. hook up a router behind the cable modem 6. you should able to get public IP from the ISP and it will show up in the router status when you login the router. ** remove the BATTERY from the cable modem if built-in and follow from #1~

if you don't follow above FR328 may not get public IP from your ISP.

I would first test the FR328 in DHCP and SINGLE pc to make sure you can re-establish the internet then work on your server setup and workstation