NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
FVS338 and iPhone6 VPN
FVS338 Router Ver 3.1.1-08
Trying to connect an iPhone6 using VPN. Using "Application Notes for IPSec Policy supporting Apple iPhone VPN Connectivity" from Atricle ID: 24236
Does not connect with following log:
2016 Nov 29 16:50:33 [FVS338] [IKE] Received mode config from 104.10.253.74[500], but we do not have ISAKMP-SA._
2016 Nov 29 16:50:33 [FVS338] [IKE] an undead schedule has been deleted: 'ph1_main'._
2016 Nov 29 16:50:33 [FVS338] [IKE] Failed to find proper address pool with id -1_
2016 Nov 29 16:50:33 [FVS338] [IKE] Sending Informational Exchange: delete payload[]_
2016 Nov 29 16:50:33 [FVS338] [IKE] Radius Server Timeout_
2016 Nov 29 16:50:33 [FVS338] [IKE] 0.0.0.0 IP address has been released by remote peer._
2016 Nov 29 16:50:33 [FVS338] [IKE] Received attribute type "ISAKMP_CFG_REPLY" from 104.10.253.74[500]_
2016 Nov 29 16:50:33 [FVS338] [IKE] ISAKMP-SA established for 104.10.253.75[500]-104.10.253.74[500] with spi:8162fc629e57bc78:0006552c4ac621f2_
2016 Nov 29 16:50:32 [FVS338] [IKE] Sending Xauth request to 104.10.253.74[500]_
2016 Nov 29 16:50:32 [FVS338] [IKE] Ignore INITIAL-CONTACT notification from 104.10.253.74[500] because it is only accepted after phase1._
2016 Nov 29 16:50:32 [FVS338] [IKE] Setting DPD Vendor ID_
2016 Nov 29 16:50:31 [FVS338] [IKE] DPD is Enabled_
2016 Nov 29 16:50:31 [FVS338] [IKE] Received Vendor ID: DPD_
2016 Nov 29 16:50:31 [FVS338] [IKE] Received unknown Vendor ID_
2016 Nov 29 16:50:31 [FVS338] [IKE] Received Vendor ID: CISCO-UNITY_
2016 Nov 29 16:50:31 [FVS338] [IKE] Received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt_
2016 Nov 29 16:50:31 [FVS338] [IKE] Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02__
- Last output repeated 8 times -
2016 Nov 29 16:50:31 [FVS338] [IKE] Received unknown Vendor ID_
2016 Nov 29 16:50:31 [FVS338] [IKE] Beginning Identity Protection mode._
2016 Nov 29 16:50:31 [FVS338] [IKE] Received request for new phase 1 negotiation: 104.10.253.75[500]<=>104.10.253.74[500]_
2016 Nov 29 16:50:31 [FVS338] [IKE] Anonymous configuration selected for 104.10.253.74[500]._
I have posted all of my results.
20 Replies
Hi DickPalm,
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved we encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The Netgear community looks forward to hearing from you and being a helpful resource in the future!Thanks,
Thank you for you suggest article. Unfortunately the article didn't address the FVS338. There is no place to added a user and the only choice for type is admin or guest.
So I purchased a FVS336v2 with the latest firmware and tried connecting though it using the setup in the article. Did finally get it working with some variations and problems.
Problems:
1. Trying to connect through the WAN is nearly impossible. It would continually drop the connection. Had to connect through the LAN. The FVS338 didn't have the problem.
2. The only way to connect the IPhone and pass data was to use the Mode Config we had for the Netgear VPN Client used for a Windows laptop.
3. It would connect using the Mode Config the article suggested, but wouldn't pass data.
4. To have changes have effect was to disconnect power and re-connect or to delete the configuration, reboot and install the new configuration. The reboot command was questionable if it did any thing.Hello DickPalm,
What firmware version are you running on the FVS336Gv2? Are you experiencing the dropouts only when the VPN is active?
Thanks,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
