NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
FVS338 VPN still won't accept client
I got help here last week with a problem with the VPN Client not connecting to my FVS338 firewall. It worked on Friday, but now it is not working again, and the configuration is exactly as it was on ...
Hi HankLambert,
Is the LAN network configured on your FVS338 different from the the LAN network of the laptop where the VPN Client software is installed?
It is recommended that the LAN network on the FVS338 should be different (for example: the FVS338 LAN has a network address of 192.168.1.0/24) from the laptop where the VPN Client software is installed (for example: the PC has an IP address of 10.0.0.9/24). And of course, the laptop should be outside the network of your FVS338.
Furthermore, try to disable PFS on the VPN policy of the FVS338 as well as disable PFS on the VPN Client software then check if you could open the tunnel.
I will be looking forward to your response.
Regards,
DaneA
Netgear Community Team
I am sure the LANs are different. The VPN client could be operating from anywhere, but we do not use a standard 192.168.1.0 network internally but custom octets. I do that on purpose to support VPN and remote access.
PFS was disabled on the client and I disabled it on the firewall. Still no good.
--Hank
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
