SRX5308 no Internet access on 2nd VLAN

Question

I am using the details provided at&nbsp;http://kb.netgear.com/app/answers/detail/a_id/8898/~/2-vlans-accessing-internet-using-layer-2-switch-%26-router to configure a 2nd VLAN for guest wireless access. I am able to get an ip address on my second vlan however I cannot browse the internet. How can I allow Internet access on the 2nd VLAN?

Sophostry · Answer

When creating a second VLAN, unless using the DMZ, it should have internet access by default if the other VLANs do. &nbsp;Do you have an outbound rule for the 2nd VLAN that blocks everything?

jhodges8 · Answer

My default outbound rule is to allow all traffic. Is there a log on the SRX to see if it is dropping packets?

DaneA · Answer

Hi&nbsp;jhodges8,
&nbsp;
jhodges8 wrote:
Is there a log on the SRX to see if it is dropping packets?

Yes, there is. &nbsp;Kindly read&nbsp;pages 362-366 of the&nbsp;SRX5308 reference manual&nbsp;here. &nbsp;
&nbsp;
Regards,
&nbsp;
DaneA
NETGEAR Community Team

jhodges8 · Answer

Ok, nothing showing in the log and still no access for 2nd VLAN.

DaneA · Answer

Hi&nbsp;jhodges8,
&nbsp;
Kindly answer the questions below:
&nbsp;
a. What is the current firmware version of the&nbsp;SRX5308?
b. Have you double-checked the physical connections?
c. Have you tried to reset the SRX5308 back to factory default settings then reconfigure it from scratch?
&nbsp;
&nbsp;
Regards,
&nbsp;
DaneA
NETGEAR Community Team

Forum Discussion

SRX5308 no Internet access on 2nd VLAN

5 Replies

Related Content

Wired AP - SRX5308 - Internet - SRX5308 - Wired AP

Bridge 2 Networks with SRX5308 Help

R7000 signal, no internet access

SRX5308 Wan access to webserver

Orbi RBR350 FTP - Not Internet accessible

NETGEAR Academy

ProSupport for Business