Hi therei just installed my srx5308 and connected all devises... now , my qnap server has the function to set the ports (UPNP) itself but that requires a router that is supporting this... the srx5308 has this function which I enabled .. but my server still is saying that he cannot find a upnp router (no upnp router found on the network)... can you help me to use the upnp feature on the server so it sets the ports automaticaly on the srx5308?regardsdaniel

hello i did a hard reset on the firewall and it seems like this has solved my issue... since 24 hours no such aborts anymore.. lets cross fingersè!!

Hi don_daniel, For example, your DDNS is don_daniel.com and you will need port 8080 to access the NAS from outside your network. You will need open port 8080 and point it to the LAN IP Address of the NAS. Then, to access the NAS outside your network, you will enter https://don_daniel.com/8080 on the address bar of a browser. If you are within your LAN, you do not need DDNS to access the server via telnet. Port forwarding, port triggering and UPnP are not needed as well. Just simply open hyperterminal or PuTTy then open a telnet session to the server. Regards, DaneA NETGEAR Community Team

Hi don_daniel, Kindly answer the questions below: a. Is the QNAP server directly connected to the SRX5308? b. It is possible that port forwarding is required. What are the ports that are needed to be opened for the QNAP server? c. What is the current firmware version of the SRX5308? Regards, DaneA NETGEAR Community Team

hii have 2 QNAP.s ... one is directly linked to the srx5308 and the other one has a prosave managed switch in between. ... it looks like sometimes it finds the upnp and then again not.... i have tons of port forwarding that I needi am using 4.3.4-2 by the way... where do I have an overview of all the IP addresses currently used in my LAN network? I couldn't find it so far...

Hi don_daniel, About port forwarding on the SRX5308, kindly read pages 140-145, 149-151 and 164-168 of the SRX5308 reference manual here. On the web-GUI of the SRX5308, go to Network Configuration > LAN Settings > LAN Groups to check the overview of all the IP address currently used in your LAN network. For more information, kindly read pages 97-98 of the SRX5308 reference manual. Regards, DaneA NETGEAR Community Team

srx5308 upnp activated but my qnap cannot assign its ports

35 Replies

DaneA
NETGEAR Employee Retired
Oct 27, 2016
Hi don_daniel,

Kindly answer the questions below:

a. Is the QNAP server directly connected to the SRX5308?

b. It is possible that port forwarding is required. What are the ports that are needed to be opened for the QNAP server?

c. What is the current firmware version of the SRX5308?

Regards,

DaneA

NETGEAR Community Team
- don_daniel
  Tutor
  Oct 27, 2016
  hi
  i have 2 QNAP.s ... one is directly linked to the srx5308 and the other one has a prosave managed switch in between. ...
  it looks like sometimes it finds the upnp and then again not....
  i have tons of port forwarding that I need
  i am using 4.3.4-2
  
  by the way... where do I have an overview of all the IP addresses currently used in my LAN network? I couldn't find it so far...
  - DaneA
    NETGEAR Employee Retired
    Oct 30, 2016
    Hi don_daniel,
    
    About port forwarding on the SRX5308, kindly read pages 140-145, 149-151 and 164-168 of the SRX5308 reference manual here.
    
    On the web-GUI of the SRX5308, go to Network Configuration > LAN Settings > LAN Groups to check the overview of all the IP address currently used in your LAN network. For more information, kindly read pages 97-98 of the SRX5308 reference manual.
    
    Regards,
    
    DaneA
    
    NETGEAR Community Team

Forum Discussion

srx5308 upnp activated but my qnap cannot assign its ports

35 Replies

Related Content

Bridge 2 Networks with SRX5308 Help

Activate Insight Premium Subscription

SRX5308 VPN Client Lite license will not activate

No LAN port aggregation activation between CM3000 and RS700S

how to activate armor in RS500?

NETGEAR Academy

ProSupport for Business