NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
AX1800 WAX610Y shows configd[3160]: get_cur_channel: None of the interfaces are in UP state for wifi
I have two NETGEAR® Insight Managed WiFi 6 AX1800 Dual Band Outdoor Access Point (WAX610Y) Have connected 22 Cisco IP Phone SPA525G2, 11 each on each AP Have enabled only 2.4GHz as the phones suppo...
The IP Phones are Cisco connected to this two APs.
Nothing other than the phones are connected to these APs
Only 2.4GHZ is enabled.
Every few hours the accesspoints webpage comes inaccessible. Also the phones gets office.
The access points and the phones need to be restarted.
This none of the interfaces are shown continuously in the logs
Hi rhsit
Could you please send us the detailed logs for us to debug? You can download it from the moniroring page.
Upload into google or one drive and send me a link to download the logs via PM..
Thanks,
Raghu
- The issue was so severe and I was the one who bought this device. I was embarrassed and was screwed by management, I bought ubiquity last Thursday and replaced the netgear with my own money. I will connect the devices and take logs and upload. How do I DM. There is no information in this community about the issue. Also my setup was unique it seems.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
