NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Scheduling for fix canal 5G
Hello! If scheduler is enabled, it incorrectly saves a fixed channel on 5G. Instead of 44 or 48, 36 is set. To set a fixed 44 or 48, you need to disable the scheduler! Correct your mistake. I.e. it is impossible to use the scheduler. I tried to do a reset - it does not fix the problem.Thanks.
Netgear WAX610PA-100NAS
f/w ver 9.5.2.5
s/n 6AB40B2G01778
4 Replies
There are two kinds of schedulers on the WAX6xx: A scheduled reboot, and the ability to enable/disable each network (by SSID) individually on a schedule.
Assume you talk of the reboot schedule, this reads to me like the manual wireless channel setting isn't take into consideration, and the default channel is used.
Curious, does the same happen on manually reboot the WAX610 - being using warm reboot (UI -> Reboot) or cold (cut and reapply PoE/power)?
Keep in mind you talk to the communty here, so it's neither my firmware nor my mistake.
RaghuHR please.
Scheduler for SSID (disable Wifi 5G 23.00-08.00).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
