NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Eddizzo's avatar
Eddizzo
Aspirant
Oct 17, 2022

WAC124 Disconnected when Sync with NTP Server - SECOND :D

Hi at All,   It's my first post on this forum even If I read a lot of topic in past.   In this case I would like to ask support in something similar what was discussed on this topic: "WAC124 WLAN...
Firmware
Troubleshooting
DaneA's avatar
DaneA
NETGEAR Employee Retired
Oct 18, 2022

Eddizzo,

 

Let us isolate the problem.  Kindly try to connect the WAC124 (in Access Point mode) directly to the Vodafone router. Be sure that the WAC124 is on the latest firmware version.  Then, try to use the default NETGEAR NTP Server and observe if the same problem will occur.  Also, you may try using other NTP Servers and observe if the same problem will occur.  

 

Another suggestion is try to set the WAC124 in Router mode and set it as the main router connected directly to the modem.  Be sure that the SRR60 is on the latest firmware version.  Then, try to use the default NETGEAR NTP Server and observe if the same problem will occur.  Also, you may try using other NTP Servers and observe if the same problem will occur.  

 

 

Regards,

 

DaneA
NETGEAR Community Team

schumaku's avatar
schumaku
Guru - Experienced User
Oct 19, 2022

DaneA in my unqualified understanding, the only VLAN config these WAC10x or WAX124 does support is the router based bridge for IPTV configs. The LAN is supposed to run on an untagged network, and so are the wireless SSIDs. There is no other 802.1q feature available. 

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More