NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Aussie_Warrior's avatar
Dec 02, 2019
Solved

WAC5xx Antennae Radiation Patterns

Where can I find the Antennae Radiation Patterns (Smith charts) for these units for installation purposes?  Are the patterns circular, oval, or ? and the radial coverage? Are they 10m, 20m or 30meters?  I understand the building construction will effect these but there must be ideals and you work from there.  Other companies can do it, why not Netgear?  

  • Aussie_Warrior's avatar
    Aussie_Warrior
    Dec 10, 2019

    Thanks for your replies, however after reading another thread on a similar issue I decided to raise a support ticket.  The assistance I recieved from Nicco RE: Smith charts was exceptional.  Many thanks.

4 Replies

Replies have been turned off for this discussion
  • schumaku's avatar
    schumaku
    Guru - Experienced User

    Aussie_Warrior wrote:

    Where can I find the Antennae Radiation Patterns (Smith charts) for these units for installation purposes?  


    Never seen one here. 

     


    Aussie_Warrior wrote:

    Are the patterns circular, oval, or ?  


    For simplicity - take it as circular for these wall- or overhead-mounted APs.

     


    Aussie_Warrior wrote:

    and the radial coverage? Are they 10m, 20m or 30meters?  


    There are many other factors - an open-air coverage can be in the 80...100 meters range. These are numbers I remember from Cisco-Meraki or HPE specs. Finally it depends on the client density in an area.where you will run more APs on lower power.

     


    Aussie_Warrior wrote:

    Other companies can do it, why not Netgear?  


    While this would be interesting information, indeed.

     

    The effective reach is defined by the maximum regulatory allowed emitted power - and all vendors go near to the limits.

     

    There might be a difference if a vendor can offer three WAC505 for less than 200 USD or a tri-radio WAC540 for about the same price tag - while other vendors easily ask for 1000...1500 USD per AP (with some years cloud management coverage).

     

     

    • Aussie_Warrior's avatar
      Aussie_Warrior
      Aspirant

      Thanks for your assistance but if I can get the answer to the first question then the others will fall into place.

       

      The Q being:  "Where can I find the Antennae Radiation Patterns (Smith charts) for these units for installation purposes?"

       

      Can anybody else shed some light here?

      • Aussie_Warrior's avatar
        Aussie_Warrior
        Aspirant

        Thanks for your replies, however after reading another thread on a similar issue I decided to raise a support ticket.  The assistance I recieved from Nicco RE: Smith charts was exceptional.  Many thanks.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More