NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WAC730: Cannot join more than two units in ensemble
Hello, Consider this scenario: I have three WAC730 access points. We'll call them AP1,AP2,AP3. They are all on the same subnet, 172.20.0.0/24. AP1 is 172.20.0.10, AP2 is 172.20.0.11, and AP3 is ...
Make a note of this:
The subnet on the third access point was incorrect. AP1 and AP2 were set to 255.255.255.0, the correct mask for my network. AP3 was set to 255.255.0.0.
I changed AP3's subnet mask to match the other two access points, and tried rejoining AP3 to the existing ensemble. AP3 has joined the ensemble and I can see all three AP's in the ensemble IP's management address (172.20.0.6, in my case.)
This matter is resolved. Thanks.
Hi David Moisan,
Welcome to the Netgear community. Could you please help us by sharing the complete logs from monitoring page( use save option) and all 3 APs conigurations? We will take a look at those and update.
Thanks,
Raghu
Make a note of this:
The subnet on the third access point was incorrect. AP1 and AP2 were set to 255.255.255.0, the correct mask for my network. AP3 was set to 255.255.0.0.
I changed AP3's subnet mask to match the other two access points, and tried rejoining AP3 to the existing ensemble. AP3 has joined the ensemble and I can see all three AP's in the ensemble IP's management address (172.20.0.6, in my case.)
This matter is resolved. Thanks.
Glad to know your updates. Feel free to reach us if you have any further questions. Happy to help you.
Please mark this thread close by accepting as solution.
Best,
Raghu
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
