NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WAX610 won't connect via 802.3AT
I have 3 WAX610's around my house and they are all powered via POE+ but all of the units are only pulling about 9W which is causing them to all flag issues saying they are running on 802.3af. The sw...
My issue ended up being the switch didn't support it. Sorry probably not much help for you but figured I would let you know
I'm using a cheap Steamemo 5 port gig 52W POE switch from amazon(see link below). I'm guessing you're right with the handshake issue as all three are only operating at around 8W per AP. There is no setting for LLDP as the switch is extremely basic. Any suggestions would be greatly appreciated.
https://www.amazon.com/dp/B0BQ6MP1HT?ref=ppx_yo2ov_dt_b_product_details&th=1
Thank you
Hi,
I hope you are running the latest firmwares on the AP. If not then please try upgrading to the latest available firmware.
Thanks!
Pramendra
Hi
Yes, I'm running 10.7.5.3 on all 3 units.
- I’m having the same issue with numerous switches, including Netgear connected to WAX610
My issue ended up being the switch didn't support it. Sorry probably not much help for you but figured I would let you know
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
