NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Configuration with ORBI PRO SXK30 dual router
Good morning, I'm looking for help setting up my ORBI router, currently the network infrastructure is set up as follows: MODEM/ROUTER - ISP (to which I don't have access) IP: 192.168.1.1 Ethernet...
Davide_1 wrote:
Good morning,
I'm looking for help setting up my ORBI router, currently the network infrastructure is set up as follows:
- MODEM/ROUTER - ISP (to which I don't have access) IP: 192.168.1.1
Ethernet connection- AP/Switch (D-link DIR-626L) IP: 192.168.1.99 < Maybe swap this out for a 1Gb LAN switch. (GS-105 or 108)
Ethernet connection- ORBI router IP: 192.168.2.1 (connected to IP: 192.168.1.2) <If you want the modem router to be the host rotuer, then configured AP mode on the Orbi Pro system.
Thank you for the answer.
So some more consideration:
MODEM/ROUTER - ISP (to which I don't have access) IP: 192.168.1.1
Ethernet connection AP/Switch (D-link DIR-626L) IP: 192.168.1.99 < Maybe swap this out for a 1Gb LAN switch. (GS-105 or 108)
Unluckly I can only manage the device but not changet becouse is serves as anaccess point for another apparment
Ethernet connection ORBI router IP: 192.168.2.1 (connected to IP: 192.168.1.2) <If you want the modem router to be the host rotuer, then configured AP mode on the Orbi Pro system.
So If i understad correctly i can:
- Keep it as a router an do a doble NAT
- Set it as an access point, in this option i'll be able to create different Vlan (device and IOT)?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
